Research Interests
- Surface treatment/enhancement techniques in automotive and aerospace industries
- Advanced/nontraditional manufacturing processes, micro machining/manufacturing
- Surface characterization and inspection, NDT techniques, metrology and quality applications
- Intelligent manufacturing systems and AI tools, modeling and optimization methodologies
Supervised Theses
- Sadık Olguner, "Ultrasonically Assisted Deep Drawing Process on Servo Crank Press", PhD, completed (December 2019).
- Nazar Al-Karkhi, "Design and Implementation of New Electrode Geometries in Electrical Discharge Drilling", PhD, completed (January 2018).
- Abdullah Gazi Fırat, "Modeling and Optimization of Process Outputs in Electrical Discharge Drilling using Genetic Algorithm", MSc, completed (January 2018).
- Recep Halıcıoğlu, "Design Optimization, Synthesis and Control of a Mechanical Servo Press: An Industrial Application", PhD (Co-Supervised), completed (December 2015).
- Tuğba Ulutaş, "An Experimental Study on Drilling Through and Blind Holes on Inconel 718 by EDM", MSc, completed (August 2013).
- Fatih Alan, "Development of Neuro-Fuzzy Models for Hole Drilling of on Ti-6Al-4V and Inconel 718 using EDM", MSc, completed (January 2011).
Research Projects
- Supervisor (04/2016-04/2018): "Ultrasonically Assisted Deep Drawing Process on Servo Crank Press"
Department of Mechanical Engineering, University of Gaziantep
Granted by: Scientific and Technological Research Council of Turkey (TÜBİTAK), Project No: 315M300
- Research Fellow (06/2008-06/2010): "Fast Hole Drilling of Nickel and Titanium Alloys for Aerospace Applications using EDM"
Department of Mechanical Engineering, University of Gaziantep
Granted by: Scientific and Technological Research Council of Turkey (TÜBİTAK), Project No: 108M022
- Research Associate (02/2006-09/2006): "Design and Demonstration of a 4-axis Miniature Machine Tool to Enable Freeform Micromachining"
Machining and Condition Monitoring (MCM) Research Group, School of Mechanical, Materials and Manufacturing Engineering, University of Nottingham
Granted by: Engineering and Physical Sciences Research Council of United Kingdom (EPSRC), Project Director: Prof. Dr. Dragos Axinte
- Senior Researcher (08/2003-08/2005): "Deep Cold Rolling and Roller Burnishing of Advanced Titanium Alloy Components"
Rolls-Royce University Technology Center (UTC), University of Nottingham
Granted by: RCSC9 Programme, University Supervisor: Prof. Dr. Nabil N. Z. Gindy, Rolls-Royce Supervisor: Neil Fox
- Project Coordinator (09/2001-09/2002): "Equilibrium Machining"
Rolls-Royce University Technology Center (UTC), University of Nottingham
Granted by: Nottingham Innovative Manufacturing Research Centre (NIMRC), University Supervisor: Prof. Dr. Nabil N. Z. Gindy
- Research Fellow (04/1998-10/1999): "Development of Computer Aided Design and Production of Dies/Molds"
Department of Mechanical Engineering, University of Gaziantep
Supported by: University Research Fund (BAP), Project No: MF.98.05
- Research Fellow (04/1998-10/1999): "Development of Computer Aided Engineering Drawing"
Department of Mechanical Engineering, University of Gaziantep
Supported by: University Research Fund (BAP), Project No: MF.98.04