International Journals
  1. A.T. Bozdana, N.K. Al-Karkhi, "Comparative Experimental and Numerical Investigation on Electrical Discharge Drilling of AISI 304 using Circular and Elliptical Electrodes", Strojniški Vestnik - Journal of Mechanical Engineering, 2018, Vol. 64, Iss. 4, pp. 269-279.

  2. R. Halıcıoğlu, L.C. Dülger, A.T. Bozdana, "Improvement of metal forming quality by motion design", Robotics and Computer-Integrated Manufacturing, 2018, Vol. 51, pp. 112-120.

  3. S. Olguner, A.T. Bozdana, "Influence of press ram pulsation on deep drawability of dual phase steel sheet", Acta Physica Polonica A, 2017, Vol. 132, Iss. 3, pp. 742-745.

  4. A.T. Bozdana, N.K. Al-Karkhi, "Comparative experimental investigation and gap flow simulation in electrical discharge drilling using new electrode geometry", Mechanical Sciences, 2017, Vol. 8, pp. 289-298.

  5. R. Halıcıoğlu, L.C. Dülger, A.T. Bozdana, "Modeling, design, and implementation of a servo press for metal-forming application", International Journal of Advanced Manufacturing Technology, 2017, Vol. 91, Iss. 5-8, pp. 2689-2700.

  6. S. Olguner, A.T. Bozdana, "The effect of friction coefficient on punch load and thickness reduction in deep drawing process", International Journal of Materials, 2016, Vol. 3, pp. 64-68.

  7. R. Halıcıoğlu, L.C. Dülger, A.T. Bozdana, "Structural design and analysis of a servo crank press", International Journal of Engineering Science and Technology, 2016, Vol. 19, Iss. 4, pp. 2060-2072.

  8. R. Halıcıoğlu, L.C. Dülger, A.T. Bozdana, "Mechanisms, classifications, and applications of servo presses: a review with comparisons", Proc IMechE Part B: Journal of Engineering Manufacture, 2016, Vol. 230, Iss. 7, pp. 1177-1194.

  9. A.T. Bozdana, T. Ulutaş, "The effectiveness of multi-channel electrodes on drilling blind holes on Inconel 718 by EDM process", Materials and Manufacturing Processes, 2016, Vol. 31, pp. 504-513.

  10. R. Halıcıoğlu, L.C. Dülger, A.T. Bozdana, "Modelling and simulation based on Matlab/Simulink: a press mechanism", Journal of Physics: Conference Series, 2014, Vol. 490.

  11. O. Yılmaz, A.T. Bozdana, M.A. Okka, "An intelligent and automated system for electrical discharge drilling of aerospace alloys: Inconel 718 and Ti-6Al-4V", International Journal of Advanced Manufacturing Technology, 2014, Vol. 74, pp. 1323-1336.

  12. D.A. Axinte, S. Abdul Shukor, A.T. Bozdana, "An analysis of the functional capability of an in-house developed miniature 4-axis machine tool", International Journal of Machine Tools and Manufacture, 2010, Vol. 50, pp. 191-203.

  13. A.T. Bozdana, N.N.Z. Gindy, "Comparative experimental study on effects of conventional and ultrasonic deep cold rolling processes on Ti-6Al-4V", International Journal of Materials Science and Technology, 2008, Vol. 24, Iss. 11, pp. 1378-1384.

  14. A.T. Bozdana, N.N.Z. Gindy, H. Li, "Deep cold rolling with ultrasonic vibrations - a new mechanical surface enhancement technique", International Journal of Machine Tools and Manufacture, 2005, Vol. 45, Iss. 6, pp. 713-718.

  15. A.T. Bozdana, "On the mechanical surface enhancement techniques in aerospace industry - a review of technology", International Journal of Aircraft Engineering and Aerospace Technology, 2005, Vol. 77, No. 4, pp. 279-292.

  16. A.T. Bozdana, Ö. Eyercioğlu, "Development of an expert system for the determination of injection moulding parameters of thermoplastic materials: EX-PIMM", International Journal of Materials Processing Technology, 2002, Vol. 128, pp. 113-122.


International Conferences and Symposiums
  1. A.T. Bozdana, A.G. Fırat, "Prediction of material removal rate in electrical discharge drilling process using gene expression programming", 4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), October 2017, Antalya, Turkey.

  2. S. Olguner, A.T. Bozdana, "Numerical simulation of high frequency vibration assisted deep drawing", 4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), October 2017, Antalya, Turkey.

  3. S. Olguner, A.T. Bozdana, "Design and construction of an experimental setup for implementation of ultrasonic vibrations on deep drawing process", 4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), October 2017, Antalya, Turkey.

  4. R. Halıcıoğlu, L.C. Dülger, A.T. Bozdana, "An automation system for data processing and motion generation", International Artificial Intelligence and Data Processing Symposium (IDAP 2017), September 2017, Malatya, Turkey.

  5. S. Olguner, A.T. Bozdana, "Theoretical Investigation of Formability Limits for Dual Phase Steels", 3rd International Conference on Engineering and Natural Sciences (ICENS 2017), May 2017, Budapest, Hungary.

  6. S. Olguner, A.T. Bozdana, "Limiting Drawing Ratio Prediction of Dual Phase Steels Using Finite Element Method", 3rd International Conference on Engineering and Natural Sciences (ICENS 2017), May 2017, Budapest, Hungary.

  7. S. Olguner, A.T. Bozdana, "Influence of Press Ram Pulsation on Deep Drawability of Dual Phase (DP) Steel Sheet", 3rd International Conference on Computational and Experimental Science and Engineering (ICCESEN 2016), October 2016, Antalya, Turkey.

  8. S. Olguner, A.T. Bozdana, "The effect of friction coefficient on punch load and thickness reduction in deep drawing process", International Conference on Applied Mathematics and Computational Methods in Engineering (INASE 2016), May 2016, Riga, Latvia.

  9. R. Halıcıoğlu, L.C. Dülger, A.T. Bozdana, "Modelling and simulation based on Matlab/Simulink: a press mechanism", 2nd International Conference on Mathematical Modeling in Physical Sciences, September 2013, Prague, Czech Republic.

  10. O. Yılmaz, A.T. Bozdana, M.A. Okka, İ.H. Filiz, "An intelligent and automated system for EDM hole drilling of super alloys", 5th International Conference on Responsive Manufacturing (ICRM), January 2010, Ningbo, China.

  11. A.T. Bozdana, O. Yılmaz, M.A. Okka, İ.H. Filiz, "Mathematical modeling of EDM hole drilling using response surface methodology", 5th International Conference on Responsive Manufacturing (ICRM), January 2010, Ningbo, China.

  12. A.T. Bozdana, O. Yılmaz, M.A. Okka, İ.H. Filiz, "A comparative experimental study on fast hole EDM of Inconel 718 and Ti-6Al-4V", 5th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS, June 2009, Kuşadası, Turkey.

  13. O. Yılmaz, A.T. Bozdana, M.A. Okka, İ.H. Filiz, "A comparative investigation of the effects of single and multi-channel electrodes in EDM fast hole drilling of aerospace alloys", 5th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS, June 2009, Kuşadası, Turkey.

  14. A.T. Bozdana, O. Yılmaz, Ü. Yılmaz, Ö. Eyercioğlu, "An interactive modular rule-based expert system for plastic injection moulding processes (EX-PIMM) and its industrial application", 4th International Symposium on Intelligent Manufacturing Systems (IMS), September 2004, Sakarya, Turkey.

  15. P. Sasavat, N.N.Z. Gindy, J. F. Xie, A.T. Bozdana, "Near force-balanced cutting: key to increase productivity in machining", International Conference of Computational Methods in Sciences and Engineering (ICCMSE), September 2003, Kastoria, Greece.

  16. A.T. Bozdana, Ö. Eyercioğlu, "Development of a knowledge-based expert system (EX-DIMP) for the diagnosis of injection moulding process", 2nd International Conference and Exhibition on Design and Production of Dies and Moulds, 2001, Kuşadası, Turkey.

  17. T. Dereli, A.T. Bozdana, İ.H. Filiz, "A hybrid set-up planning system for prismatic components", 8th International Machine Design and Construction Conference (UMTIK), 1998, Ankara, Turkey.


National Journals and Magazines
  1. O. Yılmaz, A.T. Bozdana, M.A. Okka, İ.H. Filiz, "Uzay ve havacılık malzemelerinde elektriksel erozyon ile hızlı delik delme performansının deneysel incelenmesi", Mühendis ve Makina Journal , Vol. 51, Iss. 608, September 2010.

  2. A.T. Bozdana, O. Yılmaz, Ü. Yılmaz, Ö. Eyercioğlu, "Plastik enjeksiyon kalıplama yöntemi için geliştirilen etkileşimli ve modüler bir uzman sistem (EX-PIMM) ve endüstriyel uygulaması", Makina Tek Machinery Journal, Iss. 101, March 2006.

  3. O. Yılmaz, A.T. Bozdana, "Türbin kanatlarının tamirinde genel uyarlamalı bir strateji", Makina Tek Machinery Journal, Iss. 89, March 2005.

  4. A.T. Bozdana, O. Yılmaz, N.N.Z. Gindy, "Uçak ve havacılık endüstrisinde kullanılan mekanik yüzey iyileştirme teknolojileri ve uygulamaları", Makina Tek Machinery Journal, Iss. 83, September 2004.

  5. O. Yılmaz, N.N.Z. Gindy, A.T. Bozdana, "Türbin kanatlarının bakım ve onarım teknolojisindeki yeni eğilimler", Makina Tek Machinery Journal, Iss. 77, March 2004.


National Conferences and Congresses
  1. R. Halıcıoğlu, L.C. Dülger, A.T. Bozdana, "Sezgisel algoritmalarla hareket denetimi: servo pres uygulaması", Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu (UMTS 2015), June 2015, İzmir, Turkey.

  2. R. Halıcıoğlu, L.C. Dülger, A.T. Bozdana, "Servo pres tasarımı ve dinamik modeli: uygulamalı bir örnek", Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu (UMTS 2015), June 2015, İzmir, Turkey.

  3. O. Yılmaz, A.T. Bozdana, M.A. Okka, İ.H. Filiz, "Uzay ve havacılık malzemelerinde elektriksel erozyon ile hızlı delik delme performansının deneysel incelenmesi", 5. Makina Tasarım ve İmalat Teknolojileri Kongresi (MATİT), TMMOB Konya Şubesi, October 2009, Konya, Turkey.